Forum

Pat Barry
Moderator
Joined: Jun 12, 2020
Last seen: Oct 10, 2023
Topics: 0 / Replies: 59
Reply
RE: PA24 250 Interior conversion to 260 interior

Rusty, the answer would take a few pages. Bottom line - if you want the 5th and 6th seats, I suggest that you consider buying a 260. I assume tha...

4 years ago
Reply
RE: 5th seatbelt STC

Please let us know what you find. Pat

4 years ago
Reply
RE: 5th seatbelt STC

Jason, this is a tough one. If you had left your phone number I would have called and discussed this. Bottom line --- from what you reported the STC...

4 years ago
Reply
RE: New Guy checking in

The ICS site gives you access to some good brains and experience with maintenance. The Comanche is an outstanding aircraft, but, at fifty years plus...

4 years ago
Reply
RE: Replacement chrome tubes on struts

Craig, at this point you have a chrome repair ahead of you, most likely. Let me suggest a practice for the future. Before flight, take a cloth or a...

4 years ago
Reply
RE: Firewall Forward P Lead Replacement

Dear Todd, thanks for the information. What have I seen? The metal cover is potted with phenolic. Shielding is merely for physical protection so us...

4 years ago
Reply
RE: Firewall Forward P Lead Replacement

Todd, this requires a mechanic's sign off, so rather than suggesting that you piece wires together (assuming that you are not an A&P) I suggest th...

4 years ago
Reply
RE: PA-30 Landing Gear Door Hinge

Well, use Dave Clark's recipe for the strip with nutplates. Your hinge stock goes between the strip and the lower skin of the wing (so, it is above th...

4 years ago
Reply
RE: PA-30 Landing Gear Door Hinge

Dave, the article is accurate and a superb fix for a difficult and pesky job. The only addition might be to advise 7093 how to align and drill the ...

4 years ago
Reply
RE: Janitrol heater question

A very long time ago I decided to have my Janitrol overhauled / serviced, so I took it to Mailboxes USA (now United Parcel) and had them pack and ship...

4 years ago
Reply
RE: PA30 Electrical Failure

Switching regulator? I'm not familiar with the term. Perhaps this is the overvoltage relay? Or is it something on the generator / alternator?

4 years ago
Reply
RE: PA30 Electrical Failure

This isn't a PA30 problem, just a typical electrical problem. It sounds like you have generators, which is why you are going negative at low rpm. Th...

4 years ago
Reply
RE: Janitrol heater question

Hartzell Engines has the STC for Janitrol, and they have technical support people. Look at the Hartzell Engines website. I'd like you to have a Janitr...

4 years ago
Reply
RE: Janitrol heater question

Your issue should be easy to resolve since you already have used the heater. As you will learn, there is an overheat sensor which can cause that littl...

4 years ago
Reply
RE: Janitrol heater question

Loren, the Janitrol (and Southwind and C and D Heaters) are all owned by Hartzell Engines, and I recommend that you go to the website and find the Jan...

4 years ago
Page 3 / 4