Notifications
Clear all
This Forum is a place for Piper Comanche pilots to communicate and discuss technical issues
If you join or reset a password, please check your Spam Email box for emails from Admin at ComancheTechTalk.com
Please put your questions on the forum as well so everyone can read and respond. Someone else might be having similar questions.
All questions or topics on the Forums automatically get sent to the Tech team as well.
Comanche Instruments and Avionics
1
Posts
1
Users
0
Reactions
206
Views
Topic starter
02/05/2020 4:50 pm
Wiring diagram for electric trim
by Reinhold Probst » Wed Mar 02, 2011 5:32 am
I had to pull the Navajo yoke mounted mason trim switch from my 1967 twin Comanche 8313y when I had to remove the yoke itself.
Upon removal it turned out that the 45 year old wire insulations have disintegrated and a few soldered connections broke off before we could exactly trace the original wire scheme.
I would need some help in how to rewire the trim and disconnect switch, please.
The installed Autopilot is an Altimatic III.
Upon removal it turned out that the 45 year old wire insulations have disintegrated and a few soldered connections broke off before we could exactly trace the original wire scheme.
I would need some help in how to rewire the trim and disconnect switch, please.
The installed Autopilot is an Altimatic III.
- Reinhold Probst
- Posts: 2
- Joined: Tue Nov 02, 2010 11:13 pm
Re: Wiring diagram for electric trim
by Zach Grant L1011jock » Sun Mar 06, 2011 3:06 pm
A quick call to autopilots central or Muncie aviation should hook you up. That wiring is contained in the Altimatic III installation and service instructions.
Zach
"Keep it above 5 feet and don't do nuthin dumb!"
Zach Grant L1011jock- Technical Advisor
- Posts: 1404
- Joined: Mon Mar 22, 2004 4:35 pm
- Location: Indianapolis KEYE