Forum

Notifications
Clear all

This Forum is a place for Piper Comanche pilots to communicate and discuss technical issues

If you join or reset a password, please check your Spam Email box for emails from Admin at ComancheTechTalk.com

Please put your questions on the forum as well so everyone can read and respond. Someone else might be having similar questions.

All questions or topics on the Forums automatically get sent to the Tech team as well.

weather

1 Posts
1 Users
0 Reactions
47 Views
Admin
Joined: 5 years ago
Posts: 1162
Topic starter  

weather

Postby Dan Johnson » Mon Feb 16, 2009 3:01 am

My plane has been down for a few months for a new engine and annual. Since I got it back I have flown for about 4 hours. The weather is not acquiring on the 530 via the GDL 69A. My subscription has not lapsed. Has anybody else had this problem?
Dan
Last edited by Dan Johnson on Mon Feb 16, 2009 12:19 pm, edited 1 time in total.
User avatar
Dan Johnson
ICS member
ICS member
 
Posts: 60
Joined: Mon May 05, 2008 10:52 pm
Location: Lampasas, Tx KLZZ

 

Postby Zach Grant L1011jock » Mon Feb 16, 2009 5:03 am

Dan,
Call XM just before you go flying next and have them reactivate your radio. You will need the radio ident and you can get that off of the Xm page on the 530. Just call them up and they will send the signal up to the Sattelite so that you will re start the programing. It needs to be done every so often for some reason...
-Zach
"Keep it above 5 feet and don't do nuthin dumb!"
User avatar
Zach Grant L1011jock
Technical Advisor
 
Posts: 1404
Joined: Mon Mar 22, 2004 4:35 pm
Location: Indianapolis KEYE

 

Postby jeffrey aryan » Mon Feb 16, 2009 8:32 am

Dan,

Also tell XM to activate the WX portion in addition to the music section. They are two different services.

Jeff

jeffrey aryan
ICS member
ICS member
 
Posts: 243
Joined: Fri Jan 30, 2004 5:21 am
Location: Chino, CA (So-Cal)

XM

Postby Dan Johnson » Mon Feb 16, 2009 12:21 pm

I will call XM this A.M.
Thankyou,
Dan
User avatar
Dan Johnson
ICS member
ICS member
 
Posts: 60
Joined: Mon May 05, 2008 10:52 pm
Location: Lampasas, Tx KLZZ

 

Postby Charlie Tripp » Mon Feb 16, 2009 4:58 pm

The easiest way to refresh the XM signal is from the website below. Just enter your receiver ID.

http://www.xmradio.com/refresh/

User avatar
Charlie Tripp
ICS member
ICS member
 
Posts: 382
Joined: Thu Jun 27, 2002 5:38 pm
Location: Brownsville, TN
  •  

 

Postby SPNA » Mon Feb 16, 2009 5:31 pm

Don't call or use the website, until you are ready to turn the receiver on. Make sure you have a clear view of the Satellite, it requires a strong signal.

You should start to see the re-activation within about 10min of requesting the refresh. If it takes longer than 45 minutes call XM at the number below.

If you have access to Internet, you can also request the activation by going to the this website. I have this plus the radio ID saved on my Internet capable phone. I even did a re-fresh in the air once.

The XM weather service phone number is 800-985-9200.

Important, NOTE: Please check your 8 digit radio ID code carefully. None of the following letters are used: "I" (eye), "o" (oh), "S" or "F".

Craig Hammond ICS# 14970
Lawton-Ft. Sill OK
PA-24 250 N6701P
User avatar
SPNA
ICS member
ICS member
 
Posts: 38
Joined: Thu Sep 26, 2002 4:28 am
Location: Lawton-Ft. Sill OK

XM

Postby Dan Johnson » Mon Feb 16, 2009 5:40 pm

Thankyou Charlie.
User avatar
Dan Johnson
ICS member
ICS member
 
Posts: 60
Joined: Mon May 05, 2008 10:52 pm
Location: Lampasas, Tx KLZZ

XM

Postby Dan Johnson » Mon Feb 16, 2009 5:41 pm

Great info Craig.
Thankyou,
Dan
User avatar
Dan Johnson
ICS member
ICS member
 
Posts: 60
Joined: Mon May 05, 2008 10:52 pm
Location: Lampasas, Tx KLZZ

XM

Postby Dan Johnson » Wed Feb 18, 2009 9:08 pm

All,
Finally got a chance today to try the fix for my weather. Typed in my radio ID's for the weather data and audio on the website. Went flying. It took about 30 minutes for all the data to start working. All is well now. Thankyou for the help. It was easy to do online. :D
Dan
User avatar
Dan Johnson
ICS member
ICS member
 
Posts: 60
Joined: Mon May 05, 2008 10:52 pm
Location: Lampasas, Tx KLZZ

 

Postby Charlie Tripp » Thu Feb 19, 2009 2:13 am

I believe there is a 3 hour refresh time period. If necessary use the website from the house to refresh before you head to the airport. It should not take as long once you get going.
User avatar
Charlie Tripp
ICS member
ICS member
 
Posts: 382
Joined: Thu Jun 27, 2002 5:38 pm
Location: Brownsville, TN

   
Quote
Share: