Forum

Notifications
Clear all

This Forum is a place for Piper Comanche pilots to communicate and discuss technical issues

If you join or reset a password, please check your Spam Email box for emails from Admin at ComancheTechTalk.com

Please put your questions on the forum as well so everyone can read and respond. Someone else might be having similar questions.

All questions or topics on the Forums automatically get sent to the Tech team as well.

RAM YOKE MOUNT

1 Posts
1 Users
0 Reactions
333 Views
Admin
Joined: 5 years ago
Posts: 1162
Topic starter  

RAM YOKE MOUNT

Postby jeffylars » Sun Mar 29, 2015 9:16 pm

I need some guidance, wondering if someone may know the answer. I'm looking to mount my new IFLY740 portable GPS unit to the yoke in my airplane. The yoke tube in my 59' 250 is 1 5/8 inches diameter I believe. I need a clamp large enough to fit this tube and probably two 3-4 inch articulating arms to fit between my bow style yoke/control wheel and pivot up to a viewable angle. Adventure Pilot sells P/N # 740ram-adapter, which marries their unit to the RAM mount system. I just can't seem to find the base unit I need to get this mounted (what I'm finding is to small to fit the yoke tube). Any assistance is greatly appreciated.

Thank you,
Jeff Larson

Jeff Larson, 13685
N6260P
jeffylars
ICS member
ICS member
 
Posts: 7
Joined: Fri May 02, 2003 6:51 pm
Location: YUBA CITY, CA
  •  

Re: RAM YOKE MOUNT

Postby Don Nelson » Mon Mar 30, 2015 3:31 am

Jeff, AC Spruce sells a Rams mount with a rubber cushioned hose clamp that I've twice used on my Comanches for ipads on the yoke.
I've posted the part # here somewhere, but a long time ago.
Should be able to find it online with Spruce tho.
If not I could look it up for you tomorrow. In fact I have a spare whole setup for theipad.
Let me know,
Don
User avatar
Don Nelson
ICS member
ICS member
 
Posts: 312
Joined: Mon Nov 10, 2003 5:57 pm
Location: Burlington, Washington; KBVS

Re: RAM YOKE MOUNT

Postby Charles Schefer » Mon Mar 30, 2015 1:23 pm

User avatar
Charles Schefer
 
Posts: 563
Joined: Mon Mar 12, 2012 7:09 pm

Re: RAM YOKE MOUNT

Postby jeffylars » Mon Mar 30, 2015 1:27 pm

Thank you both. I am making progress. I much appreciate the help.
Jeff
Jeff Larson, 13685
N6260P
jeffylars
ICS member
ICS member
 
Posts: 7
Joined: Fri May 02, 2003 6:51 pm
Location: YUBA CITY, CA
  •  

Re: RAM YOKE MOUNT

Postby Don Ostergard » Mon Apr 13, 2015 11:36 pm

Hi, Jeff;
I bought the Ram "roller plate" to hold my iPad mini but built my own mounting bracket to attach the RAM plate to the yoke tube because I could not figure out a way of using RAM attaching parts without the finished product turning into a clunky mess. The mounting bracket I built is pretty simple, is rock solid, and makes the plate look like it was born there. Once you see the concept I think will easily adapt to your desired application. If you'll send me your e-mail I will send you some photos.
Don Ostergard, ICS 3263
Drumheller, AB
c-flhv@magtech.ca
Don Ostergard
ICS BOD member
ICS BOD member
 
Posts: 63
Joined: Sat Nov 20, 2004 6:59 pm

   
Quote
Share: