This Forum is a place for Piper Comanche pilots to communicate and discuss technical issues
If you join or reset a password, please check your Spam Email box for emails from Admin at ComancheTechTalk.com
Please put your questions on the forum as well so everyone can read and respond. Someone else might be having similar questions.
All questions or topics on the Forums automatically get sent to the Tech team as well.
Push To Talk Button
by Warren Janzen » Tue Apr 07, 2015 7:50 pm
- Warren Janzen
- Posts: 24
- Joined: Fri Jun 27, 2014 11:28 pm
Re: Push To Talk Button
by Don Nelson » Tue Apr 07, 2015 9:19 pm
I believe it came with the C-2000 AP and has holes marked for 3 PB switches - Mic, CWS, and A/P Dis.
Wouldn't be hard to make and install such a plate for only 1 switch, if that's all wanted. Or use this one, I could send you. My phone/camera is down right now, else I would send you a picture. Surely someone else will tho. It must be a common thing.
Let me know.
Best, Don
PS, Looked again and the right side yoke has same size plate, at right side under top bar, but with only one hole - presumably for a push to talk button only.
Dn
PPS, Photo is of course of the Pilot side yoke. Co-Pilot plate is similar tho on right side of yoke, and only a hole for the Mic button on its right.
Both are convenient to the thumbs.
Dn
- Attachments
-
Don Nelson- ICS member
- Posts: 312
- Joined: Mon Nov 10, 2003 5:57 pm
- Location: Burlington, Washington; KBVS
Re: Push To Talk Button
by Andrew Foster » Wed Apr 08, 2015 1:47 am
It requires some customizing
We first drilled the hole for the threaded shaft, the enlarged from underneath for the switch body.
Hope that helps
Andrew 61 250
- Attachments
-
- Andrew Foster
- ICS member
- Posts: 161
- Joined: Fri Dec 31, 2004 9:22 pm
