Notifications
Clear all
This Forum is a place for Piper Comanche pilots to communicate and discuss technical issues
If you join or reset a password, please check your Spam Email box for emails from Admin at ComancheTechTalk.com
Please put your questions on the forum as well so everyone can read and respond. Someone else might be having similar questions.
All questions or topics on the Forums automatically get sent to the Tech team as well.
Comanche Engines and Propellers
1
Posts
1
Users
0
Reactions
144
Views
Topic starter
26/04/2020 12:36 am
removal of starter
by Al D Hudson » Tue Dec 28, 2010 1:20 am
PA 24-260B starter has died. Cowling is off, battery cable and cable to starter is removed, BUT, what in heck is the technique for getting to the four nuts which mount the starter vertically on the engine? I do not see any way on three of them to get a socket attached. Help! Anyone wit h experience and suggestions??
- Al D Hudson
- ICS member
- Posts: 6
- Joined: Mon Feb 14, 2005 8:33 pm
Re: removal of starter
by Hansmeister » Tue Dec 28, 2010 4:37 am
You have to use an open end wrench.
Hansmeister- ICS member
- Posts: 802
- Joined: Thu Jun 27, 2002 5:44 pm
- Location: Kah-li-forn-yah
Re: removal of starter
by Al D Hudson » Thu Dec 30, 2010 2:20 am
thanks, open end was part of the solution, needed a crow's foot for one, offset for another, distributor wrench for the next one, and plain open end for the last one, after dropping the oil cooler out of the way. Wow.
- Al D Hudson
- ICS member
- Posts: 6
- Joined: Mon Feb 14, 2005 8:33 pm