Notifications
Clear all
This Forum is a place for Piper Comanche pilots to communicate and discuss technical issues
If you join or reset a password, please check your Spam Email box for emails from Admin at ComancheTechTalk.com
Please put your questions on the forum as well so everyone can read and respond. Someone else might be having similar questions.
All questions or topics on the Forums automatically get sent to the Tech team as well.
Comanche Engines and Propellers
1
Posts
1
Users
0
Reactions
113
Views
Topic starter
08/05/2020 12:50 am
oil filter addition
by Tim Eason » Sat Jan 04, 2014 1:23 am
Does anyone have any advice for for adding oil filters to PA-30 engines with screens. Are there kits for this?
- Tim Eason
- Posts: 15
- Joined: Fri Dec 06, 2013 10:47 pm
Re: oil filter addition
by JIMICS2452 » Sat Jan 04, 2014 12:49 pm
The standard Lycoming oil filter adapter will bolt right into the same place as the screen adapter with only a log book entry. Both the screen and the oil filter adapter are listed in the Lycoming parts manual for the IO320-B1A and the O540 series engines. There are a couple of manufacturers that have PMA parts.
Jim Hiatt
JIMICS2452- ICS member
- Posts: 254
- Joined: Sat Mar 09, 2002 9:26 pm
- Location: Pine Shadows Airpark - North Fort Myers, FL
Re: oil filter addition
by Tim Eason » Wed Feb 12, 2014 3:50 am
I ended up getting the oil filter adapters from WEBCO. I talked to lycoming and they wanted 650 for the kit for each engine. The webco product was 200 for each engine. The lycoming kit had a few extra parts(studs and nuts) but the price difference was too much to overcome. The stuff from Webco is great.
- Tim Eason
- Posts: 15
- Joined: Fri Dec 06, 2013 10:47 pm
