Forum

Notifications
Clear all

This Forum is a place for Piper Comanche pilots to communicate and discuss technical issues

If you join or reset a password, please check your Spam Email box for emails from Admin at ComancheTechTalk.com

Please put your questions on the forum as well so everyone can read and respond. Someone else might be having similar questions.

All questions or topics on the Forums automatically get sent to the Tech team as well.

Koolmat for the firewall

1 Posts
1 Users
0 Reactions
158 Views
Admin
Joined: 5 years ago
Posts: 1162
Topic starter  

Koolmat for the firewall

Postby John Johnson » Wed Aug 31, 2011 6:16 pm

Folks, I really like almost everything about my PA24-250...except flying it in really warm weather. I'm wondering if any of you have experience with Matt Kirk's Koolmat and cam tell me from your personal experience if hot summer flying is significantly cooler when it's installed? The Comanche does great in the coldest winter conditions, but we tend not to fly it as much when it's bitterly cold. Thanks in advance for your feedback.
John
John Johnson
ICS member
ICS member
 
Posts: 23
Joined: Wed Jun 18, 2008 7:56 pm

Re: Koolmat for the firewall

Postby DAVEG24 » Mon Sep 05, 2011 5:10 pm

I have not had any experience with the Koolmat, but I can tell you two things. One, it can only improve the situation, and two, the culprit is the muffler and shroud that lays behind the engine next to the firewall. If you really want some relief from the heat, change the exhaust system to dual exhausts. That takes the muffler out of the proximity of the firewall. Dave Pratt sells an STC'd muffler system for the 250. It's light years ahead and better than the existing system.

Dave Gitelman

DAVEG24
ICS member
ICS member
 
Posts: 754
Joined: Mon Feb 21, 2000 4:07 pm
  •  

Re: Koolmat for the firewall

Postby John Johnson » Tue Sep 06, 2011 1:02 am

Thanks for the thoughts, Dave. Unfortunately I can't affort $4,000 plus labor for a new exhaust system since mine is in perfrect condition. I can't tell from Pratt's web site if a new cowling is also required, but if so, I'll never be able to afford it!
John
John Johnson
ICS member
ICS member
 
Posts: 23
Joined: Wed Jun 18, 2008 7:56 pm

Re: Koolmat for the firewall

Postby DAVEG24 » Tue Sep 06, 2011 4:13 am

A new cowl is not required. Someday, when you're present exhaust system is in need of repair, take a close look at the newer style (if it's still available). At that point you will only be looking at the difference in cost of repair versus replacement. It may be more affordable then. Meanwhile, looks like the Koolmat is your best option.

Dave Gitelman

DAVEG24
ICS member
ICS member
 
Posts: 754
Joined: Mon Feb 21, 2000 4:07 pm
  •  

Re: Koolmat for the firewall

Postby John Johnson » Tue Sep 06, 2011 7:31 pm

Good ideas, Dave. I'll count on it!
John
John Johnson
ICS member
ICS member
 
Posts: 23
Joined: Wed Jun 18, 2008 7:56 pm

   
Quote
Share: