This Forum is a place for Piper Comanche pilots to communicate and discuss technical issues
If you join or reset a password, please check your Spam Email box for emails from Admin at ComancheTechTalk.com
Please put your questions on the forum as well so everyone can read and respond. Someone else might be having similar questions.
All questions or topics on the Forums automatically get sent to the Tech team as well.
Engine motor mounts
by Leo Monney » Tue Jun 14, 2011 12:40 am
I called McCaulley to tell them about the STC after speaking to their service department and Rebecca Williams there were nice to not only replace my motor mounts but also cover the installation.
Great customer service by far more than what we are used to in many industries.
Leo Monney
- Leo Monney
- ICS member
- Posts: 13
- Joined: Mon Feb 08, 2010 11:11 pm
Re: Engine motor mounts
by John A Pabst » Tue Feb 12, 2013 11:57 pm
The J3804-41 lord mount is the engine mount supplied in the STC kit, but do to some aircraft excessive shaking on start up and shut down (hitting the cowling) McCauley option was the J3804-42 which the only difference is in the isolator, it is gel filled.
LORD MOUNT The kit P/N J-3804-41 was developed for use in Piper Comanche using the McCauley 3-blade propeller. The kit is slightly softer than the standard kit for less vibration transmission to the cabin. The J-3804-41 kit consists of (2) J-3049-34 and (1) metal spacer Y-6769-1-S. The -42 uses the gel filled spacer is P/N J12333-2 Cessna/McCauley does not carry it in stock.
Hope this helps, thanks.
Regards
Gary Peak
McCauley Propeller Systems
Field Service Engineer
Ph 316-831-3844
- John A Pabst
- ICS member
- Posts: 3
- Joined: Thu Sep 30, 2004 12:43 am
