Forum

Notifications
Clear all

This Forum is a place for Piper Comanche pilots to communicate and discuss technical issues

If you join or reset a password, please check your Spam Email box for emails from Admin at ComancheTechTalk.com

Please put your questions on the forum as well so everyone can read and respond. Someone else might be having similar questions.

All questions or topics on the Forums automatically get sent to the Tech team as well.

alternate Air kit for 260

1 Posts
1 Users
0 Reactions
204 Views
Admin
Joined: 5 years ago
Posts: 1162
Topic starter  

alternate Air kit for 260

Postby Mark in Perry » Mon Mar 11, 2013 2:44 am

helping a friend with an annual on an early model 260, looking for any information on the alternate air box/control - appears there was an AD and a piper kit to replace the pneumatic driven with a mechanical cable actuated door. any information - configuration, drawings, pictures, etc. would be appreciate.
thanks
Mark in Perry

since 30 people have read this post but no one has seen fit to reply I assume I was not clear enough in my request. the 260 is fuel injected, so has no carb heat. however there is an alternate air inlet that bypasses the air cleaner (I assume to handle icing situations). the control is pneumatic, and the AD is supposed to convert it to mechanical (calble I assume) via a kit from piper. thats about all I know, any help would be appreciated. surely there are some 260 owners out there that could look under the cowling and see what you have?

thanks
Mark in Perry

Mark in Perry
ICS member
ICS member
 
Posts: 14
Joined: Sun Jan 03, 2010 6:44 am

Re: alternate Air kit for 260

Postby Andres Darvasi » Fri Mar 15, 2013 3:01 am

Mark,
In the Tips section I found Piper drawing No. 27186 for the kit, perhaps you can contact Piper or Webco, they have a document on http://www.webcoaircraft.com/sb/TC1A15.pdf , item 123 that relates to this.
Hope it helps.
Andres
N9359P
User avatar
Andres Darvasi
 
Posts: 75
Joined: Tue Feb 12, 2013 5:58 am
Location: Mexico City, Mexico

Re: alternate Air kit for 260

Postby Michael Bryant » Sat Mar 16, 2013 7:19 pm

My Comanche is carburated, but Webco rebuilt my carb heat box. I would guess they could rebuild your alternate airbox just the same.

Michael

Michael Bryant
 
Posts: 81
Joined: Sun Oct 16, 2011 7:59 pm

Re: alternate Air kit for 260

Postby Rick Ludwin » Sat Mar 16, 2013 7:38 pm

My 260 has a cable activated alt air box. I'll check my log book to see when/who replaced it. I was never aware that it was once pneumatic.
Rick
User avatar
Rick Ludwin
ICS member
ICS member
 
Posts: 19
Joined: Sat Jun 07, 2008 8:20 am

Re: alternate Air kit for 260

Postby JMH23 » Sat Mar 30, 2013 7:40 am

Mark,
I have the Webco STCd Alternate Air modification which is cable actuated on my 260B. Call Webco and they can help you.

Joe Hand
N9023P

JMH23
ICS member
ICS member
 
Posts: 52
Joined: Sun Jan 05, 2003 6:56 pm
  •  

Re: alternate Air kit for 260

Postby Edward Pencosky » Sun Mar 31, 2013 3:10 pm

my 260c has a cable so i can manually open alternate air.Does anyone know if this should be opened when flying in visible moisture as Dick rochford master instructor suggests when flying the piper mirage?? I know it should open automatically if it gets iced up but is it proper action to open manually when flying in moisture in case it freezes up??
Edward Pencosky
 
Posts: 44
Joined: Wed Feb 08, 2012 9:17 pm

Re: alternate Air kit for 260

Postby Mark in Perry » Fri Apr 05, 2013 4:38 pm

thanks for the reply's. would it be possible to get a picture or two of anyone's current manual cable configuration?

thanks again.

Mark in Perry

Mark in Perry
ICS member
ICS member
 
Posts: 14
Joined: Sun Jan 03, 2010 6:44 am

   
Quote
Share: