Forum

Notifications
Clear all

This Forum is a place for Piper Comanche pilots to communicate and discuss technical issues

If you join or reset a password, please check your Spam Email box for emails from Admin at ComancheTechTalk.com

Please put your questions on the forum as well so everyone can read and respond. Someone else might be having similar questions.

All questions or topics on the Forums automatically get sent to the Tech team as well.

Single fork conversion

1 Posts
1 Users
0 Reactions
134 Views
Admin
Joined: 5 years ago
Posts: 1162
Topic starter  

Single fork conversion

Postby Skip Stewart » Sun Sep 21, 2014 12:43 am

I am having trouble with the single fork mod on my 64 PA30. The wheel spacers are different and the axle nut does not seem to fit against the bearing properly. Does anyone have the length of the spacer required or an idea how to fix the axle nut issue?
Thanks!
Skip
Skip Stewart
ICS member
ICS member
 
Posts: 2
Joined: Sat Nov 01, 2008 1:26 am

Re: Single fork conversion

Postby Zach Grant L1011jock » Mon Sep 22, 2014 3:05 pm

Skip,
Give Phil a call a Webco and ask him. He might have that measurement right on the top of his head. The criticle dimension is the spacer between the fork and the wheel so that the disk clears the fork. Once you have that dimension, then you can do whatever you need to do to add spacers (shims) to the outboard side of the axle so that the axle nut seats properly in the range it can be pinned.
-Zach
"Keep it above 5 feet and don't do nuthin dumb!"
User avatar
Zach Grant L1011jock
Technical Advisor
 
Posts: 1404
Joined: Mon Mar 22, 2004 4:35 pm
Location: Indianapolis KEYE

   
Quote
Share: