Comanche Flyers
No Result
View All Result

Forum

Forums
Forums
Comanche Type Suppo...
Comanche Landing Ge...
shimmy damper repai...
 
Notifications
Clear all

This Forum is a place for Piper Comanche pilots to communicate and discuss technical issues

If you join or reset a password, please check your Spam Email box for emails from Admin at ComancheTechTalk.com

Please put your questions on the forum as well so everyone can read and respond. Someone else might be having similar questions.

All questions or topics on the Forums automatically get sent to the Tech team as well.

shimmy damper repair

 
Comanche Landing Gear
1 Posts
1 Users
0 Reactions
155 Views
RSS
 ICS archives 2008-2018
Admin
Joined: 5 years ago
Posts: 1162
Topic starter 26/04/2020 4:59 pm  

shimmy damper repair

Postby David A Reynolds » Tue Jan 17, 2012 9:37 pm

Is rebuilding the shimmy damper the best route for repair? I see Aircraft Spruce sells a kit.
Is this the best one available?
1958 PA 24 250 24-179 N5163P
David A Reynolds
 
Posts: 4
Joined: Tue Nov 30, 2010 4:13 pm
Top

Re: shimmy damper repair

Postby N3322G » Tue Jan 17, 2012 10:31 pm

David,

I got the new one from Air Part of Lock Haven

http://www.airpartsoflockhaven.com/

and have been very happy with it.

Pat

Patricia Jayne (Pat) Keefer ICS 08899
PA-39 #10 Texas

User avatar
N3322G
ICS member
ICS member
 
Posts: 1911
Joined: Thu May 08, 2008 1:58 pm
Location: Fort Worth, Texas area
Top

Re: shimmy damper repair

Postby jeffrey aryan » Wed Jan 18, 2012 6:21 am

Ditto on Air Parts.

Jeff Aryan

jeffrey aryan
ICS member
ICS member
 
Posts: 243
Joined: Fri Jan 30, 2004 5:21 am
Location: Chino, CA (So-Cal)
Top

Re: shimmy damper repair

Postby David A Reynolds » Wed Jan 18, 2012 3:21 pm

Thanks for reply. Just ordered parts
1958 PA 24 250 24-179 N5163P
David A Reynolds
 
Posts: 4
Joined: Tue Nov 30, 2010 4:13 pm
Top

Re: shimmy damper repair

Postby N3322G » Wed Jan 18, 2012 4:29 pm

David,

If you are doing the work yourself, watch and make sure all the right washers and spacers are in place - otherwise the nose gear housing can get scored. Clifton Aero noticed that problem on my twin and easily fixed it.

Pat

Patricia Jayne (Pat) Keefer ICS 08899
PA-39 #10 Texas

User avatar
N3322G
ICS member
ICS member
 
Posts: 1911
Joined: Thu May 08, 2008 1:58 pm
Location: Fort Worth, Texas area
Top

Re: shimmy damper repair

Postby Michael Rath » Wed Jan 18, 2012 5:32 pm

Is their a diagram that shows the proper washers and spacers? I looked through the parts and service manual and couldn't find anything. I would like to make sure mine is right.
Michael Rath
 
Posts: 72
Joined: Wed Nov 23, 2011 3:10 am
  •  
Top

Re: shimmy damper repair

Postby N3322G » Wed Jan 18, 2012 6:50 pm

Michael, this is where my expertise runs out. I only know it was a problem and that Clifton fixed it.

I do suspect that Aircraftsman, Inc in Chino, CA is the shop that re-installed it incorrectly.

Pat

Patricia Jayne (Pat) Keefer ICS 08899
PA-39 #10 Texas

User avatar
N3322G
ICS member
ICS member
 
Posts: 1911
Joined: Thu May 08, 2008 1:58 pm
Location: Fort Worth, Texas area
Top

Re: shimmy damper repair

Postby Michael Rath » Wed Jan 18, 2012 11:59 pm

Thanks Pat

Anyone else out there know the proper washers and spacers required for both ends of the dampner?

Michael Rath
 
Posts: 72
Joined: Wed Nov 23, 2011 3:10 am
  •  
Top

Re: shimmy damper repair

Postby Ray B » Fri Jan 20, 2012 6:17 am

If you need a new dampener you probably need new bushings/washers/bolts etc. at the attach points. I got mine at Webco. Ray B
Ray B
ICS member
ICS member
 
Posts: 144
Joined: Wed Dec 23, 2009 6:02 am
Top

   
Quote
Forum Jump:
  Previous Topic
Next Topic  
Share:
No Result
View All Result

© 2020 Comanche Tech Talk

This website uses cookies. By continuing to use this website you are giving consent to cookies being used. Visit our Privacy and Cookie Policy.