This Forum is a place for Piper Comanche pilots to communicate and discuss technical issues
If you join or reset a password, please check your Spam Email box for emails from Admin at ComancheTechTalk.com
Please put your questions on the forum as well so everyone can read and respond. Someone else might be having similar questions.
All questions or topics on the Forums automatically get sent to the Tech team as well.
Avionics shop in the NE
by Michael Bryant » Sat Jul 09, 2016 3:52 pm
We are based at Lancaster, PA (KLNS).
We are looking for recommendations in the NE, particularly SE PA, NJ, MD, and DE.
Thank you.
Michael
- Michael Bryant
- Posts: 81
- Joined: Sun Oct 16, 2011 7:59 pm
Re: Avionics shop in the NE
by Donald Shaffer » Sat Jul 09, 2016 7:35 pm
- Donald Shaffer
- Posts: 4
- Joined: Sat Jul 02, 2016 10:10 pm
Re: Avionics shop in the NE
by Frank Steinberg » Tue Jul 12, 2016 9:22 pm
Frank
- Frank Steinberg
- Posts: 1
- Joined: Mon Dec 07, 2015 9:12 pm
Re: Avionics shop in the NE
by Michael Bryant » Wed Jul 13, 2016 9:04 pm
Michael
- Michael Bryant
- Posts: 81
- Joined: Sun Oct 16, 2011 7:59 pm
Re: Avionics shop in the NE
by Tomoharu Nishino » Mon Aug 01, 2016 6:21 pm
The flying club I belong to had some major avionics work done by them -- Aspen PFD/MFD, new A/P, new audio panel, new transponder -- and they did a fantastic job. We knew they had done a good job when 6 months later the plane was in for annual at our usual mechanic, who removed the panel and glare shield to look inside, and they commented on how immaculately the installation had been done.
I recently had them install GPS (GTN750) and engine monitor in my PA39. And again, they did a fantastic job. In both cases, on time and on budget.
They aren't always the cheapest, but they do a great job. And Todd Adams, the owner and head sales guy, is a straight up guy. He will walk you through the available options, and will even talk you out of more expensive solutions or additional work if he thought they were unnecessary.
Tomoharu
- Tomoharu Nishino
- Posts: 19
- Joined: Wed Apr 29, 2015 3:29 am
