Forum

Notifications
Clear all

This Forum is a place for Piper Comanche pilots to communicate and discuss technical issues

If you join or reset a password, please check your Spam Email box for emails from Admin at ComancheTechTalk.com

Please put your questions on the forum as well so everyone can read and respond. Someone else might be having similar questions.

All questions or topics on the Forums automatically get sent to the Tech team as well.

#6 Cylinder Base Wrench

1 Posts
1 Users
0 Reactions
196 Views
Admin
Joined: 5 years ago
Posts: 1162
Topic starter  

#6 Cylinder Base Wrench

Postby Alan Alsup » Mon Apr 15, 2013 3:26 pm

I am in the middle of a top overhaul on my 1959 PA-24-250 that has an O-540 A1A5. I bought the the 3/8" and 1/2" Lycoming cylinder base wrenches from Aircraft Tool Supply and was able to get all the cylinders off except the #6 cylinder. I am unable to get the top right 1/2" nut off do to the tool conflicting with the motor mount. Does anybody out there know where I can get a wrench that will clear the motor mount to take this nut off?

Thanks,

Alan

Alan Alsup
ICS member
ICS member
 
Posts: 2
Joined: Wed Aug 27, 2008 1:11 am

Re: #6 Cylinder Base Wrench

Postby Ray B » Fri Apr 19, 2013 5:32 pm

Alan I thought I'd left a message on the forum site yesterday but it disappeared from my computer. If you still have not found a solution to the problem you may have to go to a shop that has the correct wrench and beg barrow or steal same. When I checked my '60 250 (same engine) there was no problem getting the wrench to fit around the motor mount, assuming the rear baffle is removed. I bought my wrenches 40 years ago for my first Comanche and they're identical to our FBO's wrenches. You might call Aircraft Tool Supply to ensure they sent the correct wrench. Ray B
Ray B
ICS member
ICS member
 
Posts: 144
Joined: Wed Dec 23, 2009 6:02 am

   
Quote
Share: