Notifications
Clear all
This Forum is a place for Piper Comanche pilots to communicate and discuss technical issues
If you join or reset a password, please check your Spam Email box for emails from Admin at ComancheTechTalk.com
Please put your questions on the forum as well so everyone can read and respond. Someone else might be having similar questions.
All questions or topics on the Forums automatically get sent to the Tech team as well.
Comanche Airframes
1
Posts
1
Users
0
Reactions
109
Views
Topic starter
26/04/2020 2:26 am
Fresh Air Vents
by Charles (David) Miller » Sun Jun 26, 2011 4:51 pm
Can anyone tell me how to change the vents on either side of the instrument panel on my twin? Looks like I have to take the inst. panel loose. I did the cabin vents, although I had to have new mounting plates made, but can't figure out the other ones. I've got the service and parts manuals, but they aren't clear either.
Charles (David) Miller- Posts: 25
- Joined: Tue Dec 07, 2010 1:56 am
Re: Fresh Air Vents
by md11flyer » Sun Jun 26, 2011 7:44 pm
David:
I have a pa-30b and the vents just are held in place with the plastic trim. Once you take the trim off the pillar on the passanger side and the
entire plastic window trim on the pilots side the vent assemblies just slide out back from the tube coming from the instrument panel side.
Now you might find over the years someone might have put in a screw or 2 , but once the plastic trim is off you will be able to check that out.
I have a pa-30b and the vents just are held in place with the plastic trim. Once you take the trim off the pillar on the passanger side and the
entire plastic window trim on the pilots side the vent assemblies just slide out back from the tube coming from the instrument panel side.
Now you might find over the years someone might have put in a screw or 2 , but once the plastic trim is off you will be able to check that out.
Good luck,
Gary
- md11flyer
- ICS member
- Posts: 330
- Joined: Tue Mar 24, 2009 3:48 pm