Forum

Notifications
Clear all

This Forum is a place for Piper Comanche pilots to communicate and discuss technical issues

If you join or reset a password, please check your Spam Email box for emails from Admin at ComancheTechTalk.com

Please put your questions on the forum as well so everyone can read and respond. Someone else might be having similar questions.

All questions or topics on the Forums automatically get sent to the Tech team as well.

Flaps problem

1 Posts
1 Users
0 Reactions
35 Views
Admin
Joined: 5 years ago
Posts: 1162
Topic starter  

Flaps problem

Postby Jeff Munford » Sun May 12, 2013 3:27 pm

Flaps not holding. Have a 1960 180 with manual flaps. The flaps won’t lock in unless you are VERY careful when selecting 1-3 notches. This wasn't a huge concern, but yesterday the flaps were in "2 notches" and SNAPPED to one on final. Fortunately I wasn't in ground effect yet and there was no "consequence." Has anyone experienced this problem and what was the fix?

Jeff ICS 17570

Jeff Munford
 
Posts: 5
Joined: Thu Mar 03, 2011 1:15 pm

Re: Flaps problem

Postby Alejandro Cantarini » Mon May 13, 2013 1:14 am

i had same problem, we open wing inspection hatch and found a bird nest interfering with the lock mechanism. This was on my ferry flight when i bought the plane, i have some headaches with the old manche but all problems are gone and hes flying like a champ. :wink:
Alejandro Cantarini
 
Posts: 41
Joined: Wed Dec 12, 2012 10:07 pm

Re: Flaps problem

Postby Zach Grant L1011jock » Tue May 14, 2013 2:29 am

You need to clean the locking mechanism at the base of the johnson bar. It is under the floor and usually gets lots of crap stuck in it and thus wont latch well. The probalem that Alejandro had is with the step up lock, and thos up stops are in the wing and accessible through the gear well with the liners removed.
-Zach
"Keep it above 5 feet and don't do nuthin dumb!"
User avatar
Zach Grant L1011jock
Technical Advisor
 
Posts: 1404
Joined: Mon Mar 22, 2004 4:35 pm
Location: Indianapolis KEYE

   
Quote
Share: